M2500G Divider Valve Assembly – M2500C5G – VALVE ASSY 5 SECT BSPP (CHART)
The Zinc-Nickel coating on the steel body makes it last longer in harsh conditions. Progressive movement lubricant divider blocks function in a predetermined sequence, allowing easy system monitoring via a moving indicator pin.
Usually, the pin sends a signal to the system controller via an electrical limit switch at the end of a complete lubrication cycle.
One manifold assembly can lubricate up to 20 bearings; a simple system can comprise up to 20 manifolds. Cyclic discharge from a lubricator causes sequential movement of the pistons inside the divider block, displacing set volumetric amounts of lubricant to each point linked to the system network.
SERVICE PARTS
| DESCRIPTION | PART # |
| M2500G END SECTION W/1/8NPT PORT | 37484 |
| M2500G ZONE GREASE INLET SECTION 1/4BSPP | 37500C |
| BODY ZONE INLET 1/4 BSPP | 37514C |
| M2500G VALVE SECTION PLUG | 64161S001 |
| M2500G ALTERNATE OUT PLUG | 64161S002 |
| M2500G BASE SECTION 1/8BSPP | MCBA2502CG |
| M2500G END SECTION | MCEA2503G |
| M2500G INLET SECTION 1/4BSP | MCI2504CG |
| M2500G TIE ROD KIT 5SEC | MCRK25055G |
| M2500G VALVE SECTION BYPASS | MCVA2501BPG |
| M2500G VITON O-RING | U1720005S |
| M2500G VALVE MOUNTING SCREWS | U212A6 |
| M2500G TIE ROD NUT | U251A |
Reviews
There are no reviews yet.